Letter for Silicone friends have a better understanding of thermal silica not be unfamiliar, today, let everyone have a conversation related matters, in order to help everyone work. Thermal silica is defined on the basis of silicone rubber adds specific thermal filler formed a class of silicone. Such thermal silica gel generally include adhesives, thermal silicone potting material, and has a certain shape vulcanized into thermal silica films, thermal silicone pad. Use a clean surface: will be sticky or coated finishing clean, remove rust, dirt and oil. 2, sizing: unscrew the hose cap, first with the tip of the cap to pierce the seal, the glue to the clean surface, coated or perfusion. 3, the cure: the good parts in the air painting will slowly crust occurs, any action should be completed before the surface crust. Curing process is a solidified over from the surface to the interior, and in less than 24 hours (at room temperature and 55% relative humidity) glue curing depth of 2 ~ 4mm, if the position is deep, especially in the air is not easily accessible to the site, Full curing time will be extended, if the temperature is low, the curing time will be extended. 4, the operating member does not move until good not achieve sufficient strength, or packaging. Thermal silica film can be a good contact surface to fill the gap, the air out of the contact surface, the air is a poor conductor of heat, it will seriously hinder the heat transfer between the contact surfaces; With supplementary thermal silica films, you can make contact with Better face full contact, truly face to face contact. reaction temperature can reach as far as possible on a small temperature difference. If you want to know more information, please visit (thermal grease http://www.ausbond.com.cn) Website